Roper Gear Pump 18AL02

7.55 gpm, 300 psi, 3/8 in NPT Ports, Flange Mounted with Relief Valve, Lip Seal

$906.00 Including Tax is $1,126.16

SKU: 01110090 Category:

Available on backorder

Estimated delivery between 2024/10/08 - 2024/10/10
Description

A Series General Purpose Pumps

General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer

Up to 59 GPM ● Up to 300 PSI

Roper A Series pumps are adaptable to a wide range of applications pumping clean fluids, such as pressure lubrication, hydraulic service, fuel supply or general liquid transfer.

These pumps are designed to operate at standard motor speeds, with provisions for flange or foot mounting. The internal bearings are lubricated by the fluid being pumped. With only two moving parts, the pumps run quietly.

They are manufactured and assembled with close tolerances, and regularly tested to insure dependable performance. Factory assembled for clockwise rotation (facing the pump drive shaft end), most may be reassembled for operation with equal effi ciency in a counter-clockwise rotation.

MATERIALS OF CONSTRUCTION
Standard Fitted
Housing ……………………………………. Cast Iron
Gears ……………………………………….. Ductile Iron*
Hardened Steel**
Bearings……………………………………. Bronze
Idler Shafts ……………………………….. Ductile Iron*
Steel**
Drive Shafts ………………………………. Hardened Steel
Optional Materials
Housing ……………………………………. Ductile Iron***
Bearings……………………………………. Iron, Carbon
*06 and larger sizes. **03 and smaller sizes.
***In 005, 01 and 02 sizes

FEATURES

■ Designed to operate at standard motor speeds
■ Bi-directional rotation

Quiet-Running Helical Gears

Accurate machining insures:
■ proper meshing
■ reduced friction and vibration
■ quiet, efficient operation
■ long life

Long-Lasting Bearing Surfaces
■ Bearings are special wear-resistant, high-lead bronze. (Iron and carbon bearings are available.)
■ Four heavy duty sleeve bearings give positive support to pumping gears and insure long, efficient service.

Precise, Rugged, Maintenance-Friendly Design
■ All castings are cast iron.
■ Precise manufacturing tolerances provide minimum clearances for maximum pumping efficiency.
■ Large, hardened steel dowel pins insure positive alignment between the faceplate, case, and backplate.

Additional information
Weight 9 lbs
Dimensions 22 × 12 × 12 in
PORT SIZE(in)

3/8

MAX FLOW(gpm)

7.55

MAX SPEED(RPM)

3600

MAX PRESSURE(psi)

300

MAX TEMPERATURE(℉)

212

SEAL OPTION

Lip Seal

PUMP MODEL

COUNTRY OF ORIGIN

USA

Brand

Brand

ROPER

Roper is a US pump manufacture

You may also like…

$707.00 Including Tax is $878.80

7.55 gpm, 300 psi, 3/8 in NPT Ports, Flange Mounted with Relief Valve, Packed Box

$731.00 Including Tax is $908.63

7.55 gpm, 300 psi, 3/8 in NPT Ports, Flange Mounted, Lip Seal

$603.00 Including Tax is $749.53

7.55 gpm, 300 psi, 3/8 in NPT Ports, Flange Mounted

$750.00 Including Tax is $932.25

7.55 gpm, 300 psi, 3/8 in NPT Ports, Flange Mounted with Relief Valve

$574.00 Including Tax is $713.48

7.55 gpm, 300 psi, 3/8 in NPT Ports, Flange Mounted, Packed Box

Roper Gear Pump 18AL02

Available on backorder

Estimated delivery between 2024/10/08 - 2024/10/10