GDI 1.688″ Circ Sub, Assembly – 1.000″ AMMT Box x Pin 2002.0429.000.0

SKU: 0400033 Category:
Description
Hydraulically operated Circulation Sub offers the operator two different functions. When drilling with a mud motor, a ball may be dropped in order to shift the Circulation Sub into the open position, which in turn uses the drop ball to shut off the flow to the mud motor, forcing the circulation flow out the four ports in the side of the Circulation Sub. Higher rates can be utilized once the ports are open; these rates are more than normally allowed to be put through a standard mud motor. This operation, for example, is used when milling or drilling out obstructions in a wellbore. Upon reaching target depth, the ball may be dropped to open the Circulation Sub and switch fluid flow over to nitrogen to unload the wellbore. With the flow to the motor shut off, the stator is not subjected to nitrogen, thus incurring no damage to the stator. The second function of the Circulation Sub comes from the integrated burst disk. These disks come in a variety of different burst pressures that can be selected by the operator for various applications.
Features & Benefit
  • Higher circulation rates than standard mud motors
  • Variety of burst pressures to suit all applications
  • All seals are standard O-rings and no special tools are required
Additional information
Weight 3 lbs
TOOL OD (in)

1.688

TEMP RATING(℉)

302

PRESSURE RATING(PSI)

10,000

TENSILE YIELD(lbf)

40,000

TORQUE(ft-lb)

450

THREAD TYPE

COUNTRY OF ORIGIN

Canada

Brand

Brand

GDI

Global Dynamics Inc (GDI) is focus is to develop high quality downhole technology for services into domestic and global markets.